Application of PTFE skived film tapes
PTFE skived film tape is another type of PTFE adhesive tape, which is skived into even thin film from a cylindrical PTFE block. During the skiving, the block was fixed and rotated at a high speed, and the sharp blade will shave into even thin film continuously.
Skived PTFE Tapes have a variety of useful properties that make them suitable for many applications, including electrical applications and heat sealing. The key features of Teflon turning tapes are heat resistance, maximum slip, and high lubricity.
Skived PTFE Tapes have the high elongation of PTFE material, allowing you to easily stretch and bend to accommodate irregular surfaces. Bocheng can help you find the right PTFE tape for your specific needs.
Color:
Grey
Popular Thickness:
0.13mm 0.18mm
Common thickness:
0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm
You need to consider how strong Skived PTFE Tapes you need to meet the requirements of your unique environment or job. We offer standard gray stainless steel PTFE tapes for matching mechanical and electrical components. These Skived PTFE Tapes are available in a variety of thicknesses to fit your specific job.
This tape is typically used in electrical applications where good insulation and heat resistance are required. It is also a good choice in mechanical applications, including heat sealing where high temperatures, maximum sliding, and lubricity are required.
Please leave contact information, our professional staff will contact you the first time!
Process of PTFE skived film tapes manufacturing:
Once the PTFE film has been skived from the PTFE(Teflon) block, it will be chemically treated or etched, which will remove the fluorine surface
by creating a new sodium surface. Then the heat-resistant adhesive will be allowed to bond PTFE film, resulting in PTFE Skived Tapes.
Skived PTFE Tapes Features
Non-stick PTFE film provides a very smooth surface that is easy to clean
Silicone adhesive allows clean removal from a variety of surfaces
Wide temperature range for heated machinery and equipment
Skived PTFE Tapes provide a better fit than typical extruded PTFE film tapes
Excellent chemical resistance allows the tape to withstand challenging applications
Rubber laminate rolls are wrapped around a hot polyethylene extruder to create a release surface to help minimize cleanup efforts
Temperature rating -70 to 500 °F
Difference of PTFE skived film tapes:
PTFE Skived film tape and self-adhesive PTFE tape can both resist heat, has a nonstick surface, and is chemical & UV resistant. But due to PTFE
skived film is 100% Pure PTFE, so the property is different. The PTFE skived tapes is thinner, and usually used in the electronics industry,
Application of PTFE skived film tapes:
Its high elongation makes the tape useful in applications that require conformability. The combination of skived PTFE and silicone
adhesive offers an effective solution in high temperature and high dielectric applications. Techbelts Skived PTFE tape provides superior
wear resistance, low friction, and a non-stick surface.
Applications
Areas of use include mechanical applications such as electrical insulation and cable wrapping, bellows and hose liners, gaskets, tank
and vessel lining, slide bearings, skid ways, pipe support, and bearing tape. They are also used in many other applications requiring
high-temperature resistance, low friction, and a nonstick surface.
Skived PTFE Tapes Applications
Wire harness/coil wraps and separators
Transformers
Slot liners
Heat seal strips and jaws
Labeling machine pressure pads, chute liners, friction reduction devices, etc.
Roll protection in flat die extrusion
Technical Date Sheet for Common Types:
| Item Number | Basic Fabric Thickness | Total Thickness | Adhesion (to steel) | Tensile Strength | Temperature Resistance |
| TS004AS | 0.04mm | 0.08mm | 22N/100 mm | 780 N/100mm | —70~260℃ |
| TS005AS | 0.05mm | 0.09mm | 22N/100 mm | 800 N/100mm | —70~260℃ |
| TS007AS | 0.07mm | 0.11mm | 22N/100 mm | 960 N/100mm | —70~260℃ |
| TS008AS | 0.08mm | 0.13mm | 22N/100 mm | 1050 N/100mm | —70~260℃ |
| TS013AS | 0.13mm | 0.18mm | 22N/100 mm | 1650 N/100mm | —70~260℃ |
| TS020AS | 0.20mm | 0.25mm | 22N/100 mm | 2350 N/100mm | —70~260℃ |
Skived PTFE Tapes, PTFE Skived Film Tape Wholesale Suppliers - Bocheng
Jiangsu Bocheng New Tech Materias Co., Ltd (Original name being Taixing K-FAB), was founded about 20 years ago, located in Taixing City, Jiangsu Province. Engaged in PTFE coated glass fiber cloth, PTFE adhesive tapes, PTFE mesh conveyor belts, silicone coated fabric, etc, which provides a new solution for various industrial machines, such as packaging, printing, textile, and dyeing industries. Moreover, food grade bbq grill mats, stove burner protectors, and toaster bags also provide the cooking and bakery industry with a more convenient experience.
With 20 years of experience in this industry, Bocheng one's confidence in supplying consumers with goods they want, including customized ones. We are now supplying to over 30 countries in the whole world.
We are now promoting our food-grade products on our Alibaba, Made-in-China, and Amazon shops, and we have also past the test of REACH, LFGB, and FDA, and got the corresponding certification.
Please leave contact information, our professional staff will contact you the first time!
评论
发表评论