Know something about rfid conductive mesh

RFID conductive mesh refers to a type of RFID antenna that is made of a conductive material woven or interwoven into a mesh pattern. This type of antenna is used in RFID systems to create a large-area, low-profile detection zone. Conductive mesh antennas are commonly used in item-level tracking, inventory management, and industrial automation applications.

Conductive silver paste is a type of electrically conductive material that is commonly used in electronic manufacturing and repair. It is made of a mixture of silver particles suspended in a carrier material, such as resin or epoxy. The paste is applied to a substrate, such as a printed circuit board (PCB), where it forms a conductive trace. The paste is then cured, typically by heating, to form a solid and conductive connection. Conductive silver paste is used for various purposes, such as repairing broken circuits, creating jumpers or bridges, and forming interconnections between components.

Our product:
Instruction manual
Substrate: for a variety of substrates such as PET, Teslin, coated paper, fragile paper.
Mixing: Stir well before use to restore liquidity, the proposed length of 5 to 20 minutes while stirring.
Dilution: Stir the product can be used, we recommend without diluent. For dilution, to use thinner ZK10, recommended by the weight ratio of less than 1% of silver was diluted again stirred dilution evenly.
Recommended Process
Laboratory measurements show that different customers with different curing equipment and technology, curing conditions do adjusted accordingly to achieve the best cure. The cured film thickness and final resistance is affected by many factors, such as screen mesh, tension, scraping gum hardness, angle, speed, sensitive adhesive thickness.
Thickness: 8 ± 2μm
Mesh: 250-380 mesh polyester mesh or stainless steel mesh
Cure: 10 ~ 20min @ 135 ℃
Storage and use
1. Storage temperature: 5 ~ 25 ℃, sealed and stored in a dry, cool, dark place; use immediately after opening, the remaining product to be sealed;
2. Vacuum packaging shelf life of six months.
3. This product contains organic solvent, should be used to maintain good ventilation; should be used to avoid contact with skin, if they come into contact with skin or eyes, promptly wash with water and soap.